4 thoughts on “PE hard disk MBR to GPT prompt virtual disk error”
Jessie
MBR to GPT, without using a third -party tool, using the Microsoft's "MBR2GPT" command to complete it easily. 1. Run the following command: MBR2GPT /value
to verify whether the disk meets the conversion requirements. As shown in the figure:
2. Prompt for Completed verification. 3. Run the following command to convert: MBR2GPT /Convert
4. And GPT components and update the BCD guidance configuration data. 5. Prompt Complety, the conversion is complete. 6. Prompt that you need to change the system startup mode to UEFI mode.
If the system is Windows 7, you need to support CMS motherboards. The system can only be 64 -bit before the GPT partition can be used. , UEFI startup , this software will be better, and the PE of the computer store is used, PE can also go to advertisement
It doesn't matter if the partition is deleted. As long as it is not "moved", check it with DG, you can recover, If "prompt Win32 system can only be installed in MBR", then turn on the "compatibility" mode and guide it from MBR to guide it from MBR See if it can be achieved, or change 64-bit ------------------------- your PE supports GPT Right; I don’t know why I want to change. If the conversion is changed, it can be operated in the system directly; pay attention to whether there is a partition for EFI, Since it is a solid state disk, I think there is no data, so directly directly Clear it and do it again. Let the installation file deal with the partition itself, you can use DG to adjust it anyway.
Do not change it. After the partition is established, you can choose the MBR disk when the partition is established to successfully change the format. If it is not successfully recommended to change the partition tool
MBR to GPT, without using a third -party tool, using the Microsoft's "MBR2GPT" command to complete it easily.
1. Run the following command:
MBR2GPT /value
to verify whether the disk meets the conversion requirements. As shown in the figure:
2. Prompt for Completed verification.
3. Run the following command to convert:
MBR2GPT /Convert
4. And GPT components and update the BCD guidance configuration data.
5. Prompt Complety, the conversion is complete.
6. Prompt that you need to change the system startup mode to UEFI mode.
If the system is Windows 7, you need to support CMS motherboards. The system can only be 64 -bit before the GPT partition can be used. , UEFI startup
, this software will be better, and the PE of the computer store is used, PE can also go to advertisement
It doesn't matter if the partition is deleted. As long as it is not "moved", check it with DG, you can recover,
If "prompt Win32 system can only be installed in MBR", then turn on the "compatibility" mode and guide it from MBR to guide it from MBR See if it can be achieved, or change 64-bit
-------------------------
your PE supports GPT Right; I don’t know why I want to change. If the conversion is changed, it can be operated in the system directly; pay attention to whether there is a partition for EFI,
Since it is a solid state disk, I think there is no data, so directly directly Clear it and do it again. Let the installation file deal with the partition itself, you can use DG to adjust it anyway.
Do not change it. After the partition is established, you can choose the MBR disk when the partition is established to successfully change the format. If it is not successfully recommended to change the partition tool